CH341A USB Programmer
CH341A - USB Programmer
Description
CH341A is the software required for the full operation of a physical programmer of a similar type. With its help, you can change the firmware of supported chips, clear them and save them to a folder on your computer. The program interface is extremely simple and contains only the basic set of tools without many additional settings.
CH341A - USB Programmer supports various types of chip firmware. Among them are microcircuits manufactured by NextFlash, ATMEL, WINBOND, MXIC, EON and others. This allows programming a large number of elements of laptops, PCs and TVs - motherboards, video cards, processors, BIOS, memory modules and other chips.
To flash the microcircuit, first connect the element to the programmer. It is important to observe the pinout of the connector. Then connect the device to the computer via the USB port. The CH341A program contains not only the tools for changing the firmware, but also the drivers needed to establish a connection between the programming device and the PC. If the software is installed, the drivers will automatically "get" into the system. In the lower right corner of the program window, a notification should appear that the programmer is connected.
Features of the latest USB programmer CH341A v1.34:
- Equipped with a set of required drivers;
- Complete toolkit for changing standard microchip firmware;
- Compatible with Windows from XP and above;
- Has Russian and English localization;
You must use this program carefully. Since all firmware is downloaded from third-party sites and forums (CH341A does not have its own firmware database), installation is performed at the user's own risk.
No comments