TR85.031 firmware

successfully update the firmware.

Hey, if you want to update the TR85.031  firmware it is not difficult, just take some careful steps to easily 

update or install the firmware in your Universal Led TV board Need to follow Please follow these steps to 

successfully update the firmware.

First you need to take a USB disk and format it and the firmware is ready for installation.

Now, secondly, you need to download your desired resolution according to your board and panel screen resolution.

If you have downloaded the firmware files, now copy the BIN (xxx.bin) file to USB disk and insert USB into T.R83.031 Universal Board

Here you have to power on your board and press the power key and hold it for a few seconds.

After that, start updating the firmware, the red LED will flash, when it stops flashing, remove the USB and start your LED TV.

How to download TR85.031firmware

Now, the final thing is how to download the software? Don't worry, it's very easy to download. Click the download button available at each resolution. The file will be downloaded automatically after clicking.

Download the firmware   TR85.031 

..................................................................................................................................................................

Copy the required firmware / software to the FAT32 USB disk

Plug the LCD / LED TV's main board into the U disk in the USB port

Turn on the power and wait until the IR indicator flashes off

Plug in Adisk Done (upgrading firmware will take up to 1 minute at most)

T.R85.031_1024X768	Download	1
T.R85.031_1280X800	Download	2
T.R85.031_1366X768	Download	3
T.R85.031_1400X1050	Download	4
T.R85.031_1440X900	Download	5
T.R85.031_1600X900	Download	6
T.R85.031_1600X1200	Download	7
T.R85.031_1920x1080	Download	8
T.R85.031_1920X1200	Download	9
T.R85.031_1280x1024	Download	10
T.R85.031_1400x900	Download	11
T.R85.031_1680x1050	Download	12
T.R85.031_1920x1080	Download	13