T-R83-031-640X480
Hey, if you want to update the T.R83.031 firmware it is not difficult, just take some careful steps to
easily update or install the firmware in your Universal Led TV board Need to follow Please follow
these steps to successfully update the firmware.
First you need to take a USB disk and format it and the firmware is ready for installation.
Now, secondly, you need to download your desired resolution according to your board and panel screen
resolution.
If you have downloaded the firmware files, now copy the BIN (xxx.bin) file to USB disk and insert
USB into T.R83.031 Universal Board
Here you have to power on your board and press the power key and hold it for a few seconds.
After that, start updating the firmware, the red LED will flash, when it stops flashing, remove the USB and start your LED TV.
How to download T.R83.031 firmware
Now, the final thing is how to download the software? Don't worry, it's very easy to download. Click the download button available at each resolution. The file will be downloaded automatically after clicking.
Download the firmware T.R83.031
..................................................................................................................................................................
Copy the required firmware / software to the FAT32 USB disk
Plug the LCD / LED TV's main board into the U disk in the USB port
Turn on the power and wait until the IR indicator flashes off
Plug in Adisk Done (upgrading firmware will take up to 1 minute at most)
No comments